E-Z Vinyl® Sealer is designed for use in high contact areas where improved durability, water resistance, and adhesion are critical. A key advantage is improved system flexibility. When properly applied under Mohawk pre-catalyzed or post-catalyzed systems, the system passes and /or exceeds KCMA testing. No catalyst needed. Ready to spray viscosity. Solids: 25%. Advantages: Ready to spray, no reduction necessary Good drying and leveling properties HAP’s compliant 275 VOC compliant Provides excellent tie coat adhesion Quick build up Recommended sealer for high moisture areas Available in a spray can for easy application Directions: Stir product thoroughly after opening and frequently throughout use. E-Z Vinyl® Sealer is manufactured at spray viscosity and should be applied in light, even coats of no more than 3-4 wet mils. If two coats are needed, sand the first coat aggressively with 220 grit sandpaper. Apply the second coat in a light, even coat of no more than 3-4 wet mils. Total film build of the entire system, including topcoats, should not exceed 4 dry mils. Excessive build may lead to poor adhesion, cracking or cold check problems.
