BendAble OM3 Multimode fibre is a bend-insensitive 850 nm laser-optimized 50μm Multimode fibre. It provides for best macrobending performance and supports high-density packaging cables, smallest bend-radii and challenging installation situations in advanced data centers. BendAble OM3 fibre enables serial 10 Gb/Ethernet transmission over 300 m as well as parallel transmission of next generation transmission of up to 100 Gb/s Ethernet over up to 140 m. BendAble OM3 is compatible with all commercially available standard and bend-insensitive 50μm fibres. Already bought this product from us? Share your experience on LinkedIn. FEATURES STANDARDS TECHNICAL DATASHEET Minimum bend loss in very small bend-radii applications 10Gb/s Ethernet serial transmission with guaranteed OM3 standard compliant optical performance Guaranteed OM3 standard compliance: Effective Modal Bandwidth (EMB) ≥ 2000MHz‧km @ 850nm Provides high performance at overfilled launch (OFL) bandwidth ≥ 1500 MHz‧km @ 850nm Ensures compatibility with currently commercially available bend-insensitive MMF and standard MMF Supports compact cable management systems in advanced data centre applications Guarantees reliable system performance by most stringent DMD characterisation Supports high fibre count cable manufacturing IEC 60793-2-10 ITU G651.1 TIA/EIA 492AAAB-A IEEE 802.3 BendAble OM3 Multimode Fibre Macrobending Loss/Bend Induced Attenuation Spec. Values Unit 100 turns Radius 37.5 mm 850 nm 1300 nm ≤0.05 ≤0.15 dB dB 2 turns Radius 15 mm 850 nm 1300 nm ≤0.1 ≤0.3 dB dB 2 turns Radius 7.5 mm 850 nm 1300 nm ≤0.2 ≤0.5 dB dB Performance Characteristics Bandwidth (Overfilled Launch) 850nm 1300nm ≥1500 ≥500 MHz∙km MHz∙km Effective Modal Bandwidth (EMB) 850nm ≥2000 MHz∙km Transmission Link Lengths for 10Gb/s 850nm 1300nm 300 300 m m Optical Characteristics Attenuation Coefficient¹ 850nm 1300nm ≤2.3 ≤0.7 dB/km dB/km Attenuation at 1383nm (OH-Peak) <2.0 dB/km Attenuation Discontinuities (OTDR 1300nm) <0.05 dB Chromatic Dispersion Zero Dispersion Wavelength λσ from 1295≤ λσ ≤1340 nm Zero Dispersion Slope, Sσ from 1295≤ λσ ≤1310 from 1310≤ λσ ≤1340 ≤0.105 ≤0.000375‧(1590-λσ) ps/nm2‧km ps/nm2‧km Numerical Aperture 0.200±0.015 Effective Group Index of Refraction 850nm 1300nm 1.483 1.478 Mechanical Characteristics Proof Test ≥0.69 ≥8.8 GPa N Dynamic Tensile Strength Unaged Fibre (0.5 m) Median Tensile Strength 15th Percentile Tensile Strength Aged Fibre (0.5 m) Median Tensile Strength 15th Percentile Tensile Strength ≥3.8 ≥3.3 ≥3.03 ≥2.76 GPa GPa GPa GPa Dynamic Fatigue Stress Corrosion Parameter nd (typical) ≥23 dB Operating Temperature Range -60 to 85 ℃ Coating Strip Force (typical) 1.9 N Geometrical Characteristics Core Diameter 50±2.5 μm Core Non-Circularity ≤5.0 % Core/Clad Concentricity Error ≤1.5 μm Cladding Diameter 125±1.0 μm Cladding Non-Circularity ≤1.0 % Coating Diameter 242±7 μm Coating/Clad Concentricity Error ≤10 μm Available Lengths 1.1-8.8¹ km Environmental Characteristics 850/1300 nm Change of Temperature Attenuation Increase, -60°C to 85° ≤0.1 dB/km Dry Heat Attenuation Increase, 30 days @ 85°C ≤0.1 dB/km Damp Heat Attenuation Increase, 30 days @ 85°C/85% R.H. ≤0.1 dB/km Water Immersion Attenuation Increase, 30 days in 23°C water ≤0.1 dB/km Spool Size Spool Diameter 9.25”/23.5 cm Spool Width 4.21”/10.7 cm Spindle 1”/2.54 cm Traverse Width 3.75”/9.5 cm ENGLISH DATASHEET FRENCH DATASHEET
